Stránka 3 z 4

Napsal: sob lis 18, 2006 10:54 pm
od 'bosh
shafa píše: ...Ovsem nekomu to pod prdeli muze delat dobre, treba... , hh....
No tak mozna by sem mnel poslat jeden buttkicker pro Foresta ;)

Napsal: ned lis 19, 2006 1:35 am
od Jelin
@'bosh&shafa: ROFL :lol:

Napsal: sob led 06, 2007 11:46 pm
od 'bosh
Currently looking at Anthem Statement D2 Audio/Video Processor with PVA7 amp instead of future Denon receivers...

http://statement.anthemav.com/HTML/Products/D2/D2.html
http://www.anthemav.com/NewSitev2.0/Ant ... Specs.html

But not too happy with the idea of having processor chip (scalar) in blue ray DVD player or HD DVD player, TV and Audio/Video Processor...
But like the idea that D2 is upgradeable...see D1 to D2 upgrade or AVM50 to D2 upgrade...

Napsal: ned led 07, 2007 12:30 am
od Honza
Damn HDMI :evil:

I'm doing just fine with my PCs to bring HDTV on TV screen and even classic 5.1 audio via older Denon will do.
We only need to look for one of those soon-to-be-introduced 1 TB disks to backup our HD DVD content thanks to muslix64 :wink:

Napsal: ned led 07, 2007 2:26 am
od 'bosh
It does not look HDMI 1.3 will do anything for me...except for the new lossless audio formats - someday...

Napsal: stř led 10, 2007 12:14 am
od 'bosh
Perhaps with this monster sub...buttkicker may not be required...What do you think Honza? :D :D :D

http://www.tcsounds.com/forums/index.ph ... #entry4850

"Prior to purchase each potential customer must sign a legally binding structural damage waiver" :D :D :D

and

"TC Sounds will not be held liable for damage to the end users home caused by reckless use of theBeast..." :D :D :D

Napsal: stř led 10, 2007 1:01 am
od Honza
Quad 2.5kw peak digital amplifiers :roll:

Good for testing structural stability of buildings :lol:

Napsal: stř led 10, 2007 3:27 am
od 'bosh
'bosh píše:It does not look HDMI 1.3 will do anything for me...except for the new lossless audio formats - someday...
Honza píše:Damn HDMI :evil:
Sheeet..from avsforum:

"Ditto that. For some reason, folks think that 1.3 is some sort of audio video transmission panacea. Nothing could be farther from the truth.

Let's break it down:

HDMI 1.3 will provide support for Deep Color. TRUE. Buuuut.... nothing out there supports the color bit depth for Deep Color. Not BluRay. Not HD DVD. Not cable/satellite/OTA HD. There is no consumer video format which supports the Deep Color bit depths.

HDMI 1.3 will allow for transmission of Dolby True HD and DTS-Master Audio. TRUE. Buuuuut.... these formats can be decoded inside HDDVD/BD players and passed along to any HDMI 1.1 reciver via Lossless PCM. You're not gaining anything by decoding in the receiver. In fact, I'm not even sure that you could send TrueHD or DTS-MA straight to the receiver anyways. At least with HD DVD players, you have to add menu sounds, etc, which are added internally in the player at the PCM level.

So, I don't know why everyone is worried about getting the latest and greatest HDMI 1.3. You can't take any use of it this year. Or next. Or the year after next?"

Napsal: stř led 10, 2007 10:57 am
od Honza
Am I able to see 'Deep Color' on my 14-bit EIZO? Well, picture looks great via DVI - for standard quality nad HDTV as well.
Am I able to hear good 5.1 audio? Yeah, I can send it to SPDIF output and via optical cable to receiver. Or stay with old-good 6-channel analog (not perfect quality I know) but with all options of channel mixer, dynamic gain, equalizer etc. in AC3Filter, FFDShow and similar.

I may put a secondary LCD for movies later, but DVI will do. There is no reason for HMDI in my case.
All that money for all the troubles? No way...I know of better options where to put my money...

'bosh - still want HDMI :?: :lol:

Napsal: čtv led 11, 2007 5:43 am
od 'bosh
Honza píše:
'bosh - still want HDMI :?: :lol:
I want HDMI 1.3 now for higher speed, because it increases its single-link bandwidth to 340 MHz (10.2 Gbps) to support the demands of future HD display devices, such as higher resolutions, Deep Color™ and high frame rates which currently does not exit.
I want HDMI 1.3 now for Deep Color™: HDMI 1.3 supports 30-bit, 36-bit and 48-bit (RGB or YCbCr) color depths, up from the 24-bit depths in previous versions of the HDMI specification which human eye can not distinguish after 34 bit, and currently does not exist, and Blu-Ray and HD DVD does not support.
I want HDMI 1.3 now for Broader color space: HDMI 1.3 adds support for “xvYCC” color standard, which removes current color space limitations which currently does not exit.
I want HDMI 1.3 now for New mini connector: HDMI 1.3 offers a new, smaller form factor connector option so I can spend more money on cables.
I want HDMI 1.3 now for Lip Sync: HDMI 1.3 incorporates automatic audio synching capabilities that allows devices to perform this synchronization automatically with total accuracy as long as all devices have HDMI 1.3, great, gives me a good excuse to replace all hardware bought within past 6 month.
I want HDMI 1.3 now for New HD lossless audio formats: HDMI 1.3 adds additional support for new lossless compressed digital audio formats Dolby TrueHD and DTS-HD Master Audio™, which will work with HDMI 1.0 and up.
I want HDMI 1.3 now so I can replace all my HDMI cables just in case they don't meet higher speed spec.
I want HDMI 1.3 now so HDCP can be enforced, and I won't be able to switch/split/route where I want.

Wait a minute - I do not need HDMI 1.3 - it gives me nothing... :( :( :(

I want HDMI 2.0 now for... :D :D :D

Napsal: sob led 20, 2007 9:23 pm
od 'bosh

Napsal: úte led 23, 2007 3:19 am
od 'bosh
2Shafa: "Buttkicker update"...Mno, zlomil sem drevenu kostru v gauèu(i), kdys sem pouzival "buttkicker"... :D :D :D Aahh, "home theater" kresla - konecne, no dufam ... :D

Napsal: úte led 23, 2007 10:50 am
od Honza
Another reason for not supporting Vista, HDMI and the like...
A Cost Analysis of Windows Vista Content Protection

Napsal: stř led 24, 2007 1:46 am
od 'bosh
No co - HASTA LA VISTA, HDMI :D - no je to smutne...

Napsal: pon dub 30, 2007 1:15 am
od 'bosh
Broken sofa - replaced with Berkline 45003 motorized home theater seats with 3 factory installed buttkickers- @575lb - beeeatch to install by myself from the truck :)
http://aycu22.webshots.com/image/13461/ ... 233_rs.jpg
http://aycu38.webshots.com/image/13517/ ... 939_rs.jpg
http://aycu25.webshots.com/image/16544/ ... 131_rs.jpg